Well Manager® Additional Info – Well Water Storage System

This page provides Well Manager additional info.

Well Manager Has the Largest Selection of Products Designed to Deliver the Water You Need and the Performance You Want

In a perfect world, your well would provide all the water you need when you need it – even in times of drought. If you are reading this, we suspect you may have a problem with your water supply. 

Don’t despair! Well Manager has affordable options for your low-yield, low-pressure well and, if you are a city or municipal water customer, we have solutions for you, too! 

Complete the Water Solutions Form or call us now to speak to a well water expert: 800-211-8070

There are three different models of our Well Manager 210. All models are the exact same unit, however, the orientation of the equipment is different. Selection of the model is determined by the available space to install the unit. 

Well Manager® 210 CPV


Well Manager® 210 CPV


Great Performance from unbelievably poor wells. Completely self-contained, remarkably quiet, and only 73″ high.

Well Manager® 210 CPH

Water Systems Machine by Well Manager

When you have limited ceiling height, this system provides big performance. Only 49″ high, it will fit where others won’t.

Well Manager® 210 CPLH
(Low Horizontal)

Well Manager 210CPLH model

Amazing Performance from unbelievably poor wells and situations where height is a problem: only 38″ high.

If you need a low-yield well water storage system solution, find out the features & benefits of a Well Manager system.

If you’re searching for a storage system solution to a low-yield or low-pressure water well, you may find your answer with Well Manager.

Here are some of the features and benefits of a Well Manager® water system:

  • Produces guaranteed results for improving well water performance at a known cost; drilling a new well cannot guarantee results
  • Delivers more water from a producing well than any other off-the-shelf product on the market today
  • Provides a well pressure tank with constant pressure, which allows for luxurious showers
  • Is simple to install — takes as little as 3 hours and requires no digging or changes to the well
  • Is available in sizes that will fit in floor space as small as 24” x 37”, and will fit through a 24” door
  • Protects well from damage caused by over-pumping
  • Protects pumping equipment from dry running
  • Is the most environmentally responsible water-harvesting well system and is a  green alternative to hydrofracking
  • Is drought tolerant: Our water storage system can function with a very shallow pumping reservoir level, and a Well Manager® can get water from your well when other systems can’t
  • Employs a unique flow detector designed to operate reliably no matter how much grit or sand your well produces
  • Is a dependable, fully automatic well water system that requires minimal upkeep
  • Well Manager® System includes a UL-Listed pump control panel that can relentlessly collect a predetermined amount of water at regular time intervals, enabling you to collect the entire output of a well without pumping it down or limit the amount of water that can be withdrawn
  • Is impossible to siphon the contents of the storage tank back into the well, protecting the aquifer from contamination
  • Employs a scalable concept; it works on any size water system

All systems feature constant pressure!

Well Manager Systems are the ultimate solution for low-yield and low-pressure wells!

The result of many years of development and field-testing, Well Manager® systems are in use from Alaska to Honduras by many thousands of people in their homes, offices, and schools. Even the USDA Forest Service uses our systems to manage well water systems in national parks.

Well Manager systems were designed to get more usable water from low-yield wells, and it is much more than a reservoir tank full of water buried in the ground. It controls the amount of water harvested and the frequency at which water is removed from the well, in addition to showing you how pumping is affecting well water levels. In short, it doesn’t just protect the well pump; it also protects the well from over-pumping, which is the leading cause of reduced yield and premature well failure.

Use Well Manager on almost any well, combination of wells, or on mixed sources like a well and a rainwater collection system. It works with any submersible well pump and can be used to supply buildings with an expected peak demand of as much as 100 GPM and more.

Learn how Well Manager works in a residential setting

The Well Manager well water storage system will enable a family of four to live with a one-quart-per-minute well with as little as 210 gallons of tank storage. Even better, the well water storage system can usually be installed in a few hours, changing a family’s life overnight.

The first morning after the system is installed, the family of four will have enough water and pressure to take two showers at once. Everyone in the family will be able to take a 10-minute shower, use the toilet, shave, make breakfast, and still have enough water to run the dishwasher.

The tables below demonstrate that even the one-quart per minute well can support a family of four if all the water the well produces is collected.


Per Day Requirement
Based on a range of 75 to 125 Gallons Per Person Per Day

Well Yield
How Much Water Do I Have?

Number of People Per Day Requirement in Gallons Per Day Gallons Per Minute Gallons Per Day
1 75 – 125 0 .25 360
2 150 – 250 0 .5 720
3 225 – 375 0 .75 1,080
4 300 – 500 1.0 1,440
5 375 – 625 1.5 2,160
6 450 – 750 2.0 2,880
7 525 – 875 2.5 3,600
8 600 – 1,000 3.0 4,320
 9 675 – 1,125 4.0 5,760
10 750 – 1,250 5.0 7,200


A traditional blue storage tank is pressurized as the pump draws water from the well. When the preset pressure is reached, the pump shuts off and waits for someone to use the water stored in the tank. The well is collecting water, but the pump isn’t harvesting it. As the well fills toward its static level, production slows until it stops.

Looking at a low-yield well in this way, we see that the gallon-per-minute yield of the well is more important than the amount of water the well can store — if you have the means to keep it producing without causing damage by over pumping.

Well Manager® systems are designed to keep your well producing without over pumping.

What if a running toilet empties my Well Manager tank?

Sometimes a hose or sprinkler is left on and forgotten or a toilet runs, and we do not notice until suddenly we have no water. If that happens, it takes only a few minutes to restore service when you have a Well Manager.

Because the Well Manager collects only well yield, the water level in the well is near the static level all the time. If your Well Manager is adjusted correctly and someone inadvertently empties the well water storage tank, the well is still full (the amount of water stored in the well will depend on the well’s diameter and the height to which it usually fills). All you need do is go to the Well Manager® control panel door and turn the H-O-A (Hand – Off – Auto) switch to Hand, and the well pump will start pumping water stored in the well into your water storage tank for your well system. Once you have enough water in the Well Manager® to function, you can return the H-O-A switch to Auto and go about your business.

How does the Well Manager System differ from Job Built and Cistern Systems?
We encourage you to read our FAQs for more information on how our low-yield and low-pressure water well solution and backup water system differs from seemingly comparable well water storage systems.*

For more information on how you can improve your well water performance without hiring a plumber or well drillers, contact us today.

How does a well pump pressure switch work?

Well pressure tanks run in conjunction with a component called a pressure switch. The pressure switch monitors the pressure stored in the tank. It informs the well pump when to turn on and off based on the rise and fall of pressure within the tank. Typically, households are set up to run with a pressure switch that turns the well pump on at 30 pounds of pressure and off at 50.

What is a well pressure tank?

A well pressure tank (blue tank) maintains the water pressure in your home. More importantly, it protects the life of the well pump. Every time a toilet flushes, a faucet gets turned on, or someone draws a bath, water is demanded from the well. The pressure tank holds a quantity of water to draw upon to meet these needs before asking the well pump to kick on. This process extends the time between the pump turning on and off. If that on/off cycle is too fast, that means it’s “short-cycling.” Short-cycling puts stress on your well pump and may cause it to prematurely fail. The bladder in your well pressure tank should be maintained yearly.

Other Products

MuniBoost / ConstaBoost Family of Systems

A lawn sprinkler is watering a lush green lawn. A bush is in the foreground.

System (RO)

Water Systems Machine by Well Manager

Well Watcher

Well Watcher by Well Manager

Our products are proudly made in the USA!


Want to Learn More About Well Water Storage Systems? Contact Well Manager Today!

To learn more about how or well water storage systems can improve your home, or how this green alternative to hydrofracking is the most environmentally responsible water-harvesting well system on the market today, contact Well Manager!