Improve Low Water Pressure and Restore Volume to your City Water
Homeowners across the country live with low water pressure and volume. This issue sometimes stems from clogged pipes. Other times, the problem is simply poor water pressure. While water suppliers may meet minimum standards (20 psi at 4 GPM), residents have no control over their water or its effectiveness.
The MuniBoost for re-pressurization can solve problems caused by your undersized or intermittent water service. Offering 50-70 psi at 10 GPM, the MuniBoost far exceeds minimum standards. From the shower to the dishwasher, you’ll see the difference in every corner of your home. Finally, your appliances can work like they were always meant to!
The MuniBoost is a compact, 210-gallon tank that restores water pressure and volume in city/municipal supplies. Preassembled and easy to install, the MuniBoost steps in to save you time and improve the performance of your home appliances. This system is small enough to fit through a 24” door—but big enough to deliver real results in your home.
- Delivers 50-70 psi at 10 gpm
- 210-gallon tank
- Measures 26”W x 40”D x 73”H
- Complete, preassembled system for quick installation (no digging involved)
- Maintenance manual included
- Tested for leaks and proper operation
- Will fit through a 24” door
- Can be used with water treatment equipment
- Stored water for emergency situations
This product is warranted to be free of defects in materials and workmanship for a period of one year from the date of original purchase. Individual components may be warranted by each component manufacturer for periods longer than one year.
|Max Flow Rate||10 gpm|
|Min. Incoming Pressure||n/a|
|Max. Output Pressure||50-70 psi / 60 psi constant|
|Gallons Per Minute||10 gpm|
|Inlet Diameter||1 inch|
|Outlet Diameter||1 inch|
Can Your Water Use a Boost?
We use water for much more than drinking. That’s why the pressure and volume of your water is just as important as its taste. If you’re tired of sacrificing time and efficiency with low water pressure, contact us to learn more about the MuniBoost and its many benefits. You’ll be amazed at the difference this system can have on the performance of your municipal water system!
"The main difference with the Well Manager is water pressure. We get more pressure with longer use of water from many outlets."
Joe B. Stevens
Sourland Mountains, New Jersey
Background: A large home under ten years old. Wells in the neighborhood were suffering.
"Before Well Manager, we couldn't run the dishwasher and the washer at the same time! Now, we can wash clothes, run the dishwasher and have plenty of water! We even installed a sprinkler system for our lawn. This has been possible only with the Well Manager."
John E. Warren
Northern New Jersey
Background: Tom lives in an area notorious for poor wells. The neighbors run out of water if they are not careful.
"Under heavy demand, the well would run dry. The recharge rate is 1/2gpm. The Well Manager provides all the water that we need daily and always has lots of extra water on hand. our tanks are usually always full."
Binghamton, New York
Want to Know More About How to Increase Water Pressure From a Well? Check Out Our Additional Products!
Our products are proudly made in the USA!